BuyGovernmentEducation

Product specs for TTC FB-6000-NAVY-P2

TTC FB-6000-NAVY-P2

Product Description:

TTC FB-6000-NAVY-P2 T1/T3/ATM Communications Test Set

  • Multifunction Communications Analyzer
  • Extensive bit error rate and service layer testing
  • Modular design for testing from 50 bps to 52 Mbs
  • Test an array of circuits with one instrument
    • ATM
    • Frame relay
    • Low speed data
    • T1 / 2M / T3 / 34M / ISDN
  • Unit provides storage of up to 10 test programs
  • Testing highlights
    • Fast Packet testing
    • ISDN Testing
    • T-Carrier testing
    • E-Carrier Testing
    • DTE/DCE Datacom Testing
This NAVICP model is delivered with:
  • FB6000A communications analyzer
  • Option 6001: DS1 wideband jitter measurement
  • Option 6003: DS1 jitter generation
  • Option 6004: Clock recovery (50 bps to 520 kbps)
  • Option 6005: IEEE-488 remote control
  • Interface Module 41400: RS-449/530/MIL DTE/DCE (188-114; 25-pin and 37-pin D-type connector)
  • Interface Module 41440A: T1/FT1 drop and insert (Bantam)
  • Interface Module 41945: T3 Transmission Test (WECO 560A)
  • Interface Module 42242: Diphase
  • Interface Module 43440: DS1/DS3 ATM
  • Accessory RM-6000A: Rack mount for FB6000A
  • CB-10615: bantam-to-bantam (10ft.) (Qty. 2)
  • CB-40601: dual bantam-to-RJ48C (10ft.) (Qty. 1)
  • CB-10215: RS-449/mil-188 37-pin D male-to-male (6ft.) (Qty. 1)
  • CB-10418: RS-232/EIA-530/V.24 25-pin D male-to-male (10ft.) (Qty. 1)
  • CB-30598: WECO 440A-to-440A (10ft.) (Qty. 2)
  • CB-30662: BNC-to-BNC (6ft.) (Qty. 2)

Performance Characteristics of the FB-6000-NAVY-P2

Form Factor Benchtop
Type T1/T3
Connector type (main signal) RS-449/530/Mil
T1 (DS1) Interface Yes
T3 Interface Port Yes
Fractional T1 Capable Yes
DS-1 Bit Error Rate Test Yes
DS-1 BERT Patterns Yes
DS-3 Bit Error Rate Test Yes
DS-3 BERT Patterns Yes
DS-3 Framing Type Yes
DS-0 Drop & Insert Test No
DS-1/DS-3 Drop & Insert Test Yes
vt1.5 Drop & Insert Test Yes
VF Channel Drop & Insert Test Yes
VF Tone Generation & Measurement Test Yes
FEAC Monitor/Control Yes
ESF Facility Datalink Monitor/Control Yes
SLC-96 Datalink Monitor/Control Yes
GR-303 Testing No
Graphic Pulse Mask Testing No
Error Insertion Testing No
Dial/Supervision/Signaling Test No
MF/DTMF Dial/Capture Test No
DDS Channel Test No
SS7 Monitoring/Analysis No
Frame Relay Testing No
G.821 Results No
Audio Speaker No
Microphone No
Display Type LED

Programmability/Connectivity of the FB-6000-NAVY-P2

User Interface Proprietary
Remote Control Interface IEEE488.2
Printer Port Type RS232

FB-6000-NAVY-P2 Compliance

CE Compliance Compliant
UL Compliance Compliant
Safety Issue UL 3111; CAN/CSA, C.22.2 No. 1010.1, EN-61010-1, IEC 1010-1

FB-6000-NAVY-P2 Power Requirements

Input Power 100-240 VAC, 50/630 Hz
Battery Requirement N/A