Product Description:
Anritsu S820D Broadband Site Master, 25 MHz to 20 GHz, built-in DTF, k(f) test port connector
The Anritsu S820D spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu S820D. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
Some applications for Anritsu S820D Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Anritsu S820D spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu S820D spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.
Performance Characteristics of the S820D
| Type |
Analyzer |
| Input Impedance |
50 Ohm |
| Minimum Frequency |
25 MHz |
| Maximum Frequency |
20 GHz |
S820D Physical Dimensions
- Width: 10 in(.39 in)
- Height: 2.4 in(.09 in)
- Length: 7.01 in(.27 in)
- Weight: 5.03 lbs(11.08 lb)
More Anritsu savings