Anritsu 37347C Vector Network Analyzer System, 40 MHz to 20 GHz
The Anritsu 37347C network analyzer is an instrument which measures the complex transmission and reflection characteristics of two-port devices in the frequency domain. It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two-port. Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
Anritsu 37347C network analyzers utilize synthesized-frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels. Anritsu 37347C network analyzers also can perform ratioed measurements (including phase), which require multiple receivers. The Anritsu 37347C can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group-delay response.
The Lightning 37200C/37300C Vector Network Analyzers (VNAs) are high performance tools designed to make fast and accurate Sparameter measurements of active and passive devices across the
22.5 MHz to 65 GHz range. These network analyzers integrate a synthesized source, S-parameter test set and tuned receiver into a single compact package that is ideal for bench-top testing.
The Lightning 37100C VNAs are configured as Direct-Access Receivers for antenna, frequency conversion, and multiple output device measurements. These network analyzers consist of a synthesized source and tuned receiver in a single compact unit, with direct access provided to all four receiver samplers via the front panel. The 37100C offers the ultimate flexibility to meet most receiver measurement needs, while maintaining the ability to measure all four S-parameters with the addition of a reflectometer setup at the front end of the receiver.
High throughput measurements are achieved in each model through the use of fast, 12-term error corrected sweeps, fast GPIB data transfers and an intuitive user interface. All measurement
results are displayed on a large LCD color display or on an external VGA monitor.Each of the network analyzers is designed for easy upgradeability.Any version of the 37000C VNA can be upgraded to accommodate new capabilities or additional frequency ranges by ordering the appropriate upgrade kit. 37100C to 37200C or 37200C to 37300C upgrades are also supported.
Attenuator Frequency Range:
- 37225C, 37325C 40 MHz to 13.5 GHz
- 37147C 22.5 MHz to 20 GHz
- 37247C, 37347C 40 MHz to 20 GHz
- 37169C 22.5 MHz to 40 GHz
- 37269C, 37369C 40 MHz to 40 GHz
- 37277C, 37377C 40 MHz to 50 GHz
- 37297C, 37397C 40 MHz to 65 GHz
- Fast Sweeping Synthesized Source
- Auto Reversing Test Set (37200C/37300C models only)
- Solid-State Transfer Switch (37200C/37300C models only)
- Four Independent Display Channels
- Multiple Source Control of Two External Sources
- Four Channel Receiver
- Internal Hard and Floppy Disk Drives
- LRL/LRM Calibration
- Adapter Removal Calibrations
- Fast Measurement Throughput via GPIB
- Built-In AutoCal® Control
More Anritsu savings