Product specs for Agilent 8722S

Agilent 8722S

Product Description:

Agilent 8722S 40GHz S-parameter Microwave Vector Network Analyzer

The Agilent 8722S network analyzer is an instrument which measures the complex transmission and reflection characteristics of two-port devices in the frequency domain. It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two-port. Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.

Agilent 8722S network analyzers utilize synthesized-frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels. Agilent 8722S network analyzers also can perform ratioed measurements (including phase), which require multiple receivers. The Agilent 8722S can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group-delay response.

  • Measure from 50MHz to 40GHz with 1Hz resolution
  • 100dB of dynamic range
  • Output power from -75 dBm to -10 dBm
  • Resolution of 0.01dB with ±3 dB power flatness
  • -92 dBm receiver sensitivity
  • Large color display
  • Fast sweep speed
  • Error correction, Register recall, Data transfer
  • Integrated switching
  • Measures all four S-parameters with a single connection
  • Two independent display channels
  • Measure of reflection and transmission simultaneously
  • Display all four S-parameters while tuning devices
  • Optional time domain capability
  • Computes and displays response versus time or distance
  • Serial and parallel interfaces
  • Internal FDD both DOS and LIF formats
This NAVICP model is delivered with:
  • 8722ES: Network Analyzer
  • Option 400: Adds 4th Sample and TRL
  • Option 1D5: Hi Stability Frequency
  • Option 010: Add Time Domain Capability
  • 85052C: Calibration Kit
  • 85053B: Verification Kit
  • 85054D: Calibration Kit, Type N Economy
  • 85055A: Verification Kit, Type N
  • 85056K: Calibration Kit
  • Option 001: Sliding Loads and Gauges
  • 85133D: Test Port Cable Set
  • 00911-60019: Male Sliding Load HP
  • 00911-60020: Female Sliding Load
  • 08720-90296: CLIPS Manual
  • Option E92: Supplemental manual
  • Option 0BW: Service Guide
  • 11901A: Male to APC-3.5 Adapter
  • 11901B: Female to APC-3.5 Adapter
  • 11901C: Male to APC-3.5 Adapter
  • 11901D: Calibration Kit
  • 11903A: Male to N-Male Adapter
  • 11903B: Female to N-Female Adapter
  • 11903C: Male to N-Female Adapter
  • 11903D: Coaxial Adapter(f) to type-N(m)
  • Warranty M130
  • Manual Markings
  • Calibration Labels
Agilent 8722S
Stock photo