Product Description:
Tektronix TDS3054B OSCILLOSCOPE; DPO, 500 MHZ, 5.0 GS/S, 4-CH, COLOR DISPLAY, CERTIFICATE OF TRACEABLE CALIBRATION STANDARD
The Tektronix TDS3054B oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The Tektronix TDS3054B oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
The TDS3000B Series digital phosphor oscilloscopes pack the power of digital phosphor waveform acquisition technology, WaveAlert automatic anomaly detection, OpenChoice documentation and analysis solutions with e*Scope® web-based remote control, and five application-specific modules into a lightweight, battery-capable design.
Features:
- 500 MHz, 300 MHz, and 100 MHz Bandwidths
- Sample Rates up to 5 GS/s
- 2 or 4 Channels
- Full VGA Color LCD
- 25 Automatic Measurements
- 9-Bit Vertical Resolution
- FFT Standard
- Multi-language User Interface
- QuickMenu Graphical User Interface for Easy Operation
- WaveAlert Automatic Waveform Anomaly Detection
- OpenChoice Solutions Simplify Instrument Control, Documentation, and Analysis e*Scope Web-based Remote Control
- Built-in Ethernet port
- GPIB, RS232, VGA
- TDSPCS1 OpenChoice
- WaveStar Software
- Integration with Third-party Software
- Application Modules for Specialized Analysis
- Plug-in Printer for Portable Documentation of Results
- TekProbe Interface Supports Active, Differential, and Current Probes for Automatic Scaling and Units
Supplied with:- Probes
- Documentation
- User Manual (hard copy and CD)
- Quick reference manual
- Programmer's manual
- Application module manuals
- Power cord
- Accessory tray
- Protective front cover- has holder for user manual and/or 3.5 in. floppy disks
- NIST-Traceable Certificate of Calibration
Performance Characteristics of the TDS3054B
| Form Factor |
Benchtop |
| Bandwidth |
500 MHz |
| Number of Channels |
4 ch |
| Simultaneous Channels |
4 ch |
| Simultaneous Maximum Sampling Rate/ch |
5 GSa/s |
| One ch. only max. sampling rate |
5 GSa/s |
| Max. Single Shot bandwidth |
500 MHz |
| Max. Record Length |
10000 pt/sec |
| Min. Vertical Sensitivity |
1 mV/div |
| Maximum Vertical Sensitivity |
10 V/div |
| Number of Bits |
9 bits |
| Input Impedance |
1 MOhm |
| Input Impedance (alternate) |
50 Ohm |
| Input Coupling |
AC,DC,GND |
| Maximum Input Voltage |
150 Vrms |
| Main time base - lowest |
1 ns/div |
| Main time base - highest |
10 s/div |
| Timebase accuracy |
0.002 % |
| Trigger Source |
External,Internal |
| Minimum Trigger Holdoff |
13.2 ns |
| Minimum Glitch Trigger |
39.6 ns |
| Display Type |
Color LCD |
| Display modes |
Dot,Persistence,Vector |
Programmability/Connectivity of the TDS3054B
| User Interface |
Proprietary
|
| Ports to Peripheral Devices |
Centronics,Parallel
|
| Data Storage Type |
FDD
|
TDS3054B AppNotes
TDS3054B Life Cycle Data
TDS3054B Compliance
| CE Compliance |
Compliant
|
| UL Compliance |
Compliant
|
TDS3054B Power Requirements
| Input Power |
USA (110V/60Hz) |
TDS3054B Physical Dimensions
- Width: 14.76 in(.58 in)
- Height: 6.93 in(.27 in)
- Length: 5.87 in(.23 in)
- Weight: 7.05 lbs(15.54 lb)
TDS3054B Standard Accessories
- NIST /Traceable Certificate of Calibration /Qty:1
- P6139A /10X Passive Probe /Qty:4
- Power cord /Power cord /Qty:1
- TDS3FFT /FFT Module; FFT Analysis for TDS3XXX - Statement of Compliance Standard with Thi /Qty:1
- TDS3TRG /Advancd Trigger; Logic, Pulse Trgr for TDS3XXX - Statement of Compliance Standar /Qty:1
|
| Stock photo |