Browse by:

• Category
• Manufacturer

Product Description:

Fluke - Precision 5520A/6-2-USMC Multi-Product Calibrator

• Source
  • DC and AC voltage and current
  • Multiple waveforms and harmonics
  • Two simultaneous voltage/current outputs
  • Simulate DC and AC power with phase control
  • Resistance, capacitance, thermocouples and RTDs
• Measure
  • Thermocouple temperature
  • Humidity and pressure (with included probe and pressure modules)
• Calibrate
  • Analog and digital meters up to 6 1/2 digits
  • Thermocouple and RTD thermometers
  • Process calibrators
  • Data loggers, strip and chart recorders
  • Wattmeters and power harmonics analyzers
  • Current clamps and clamp meters
  • Analog or digital handheld and bench oscilloscopes
  • Panel meters and graphical multimeters
  • Power meters, disturbance analyzers, power quality monitors, and other power quality related equipment

This NAVICP model (U.S. Marine Corps configuration) is delivered with:

• Option 5500A-SC600: 600 MHz oscilloscope calibration
• Option 5500A/Coil: 50-turn current coil (calibrate clamp-type current meters)
• 5500A/Case: roll-aboard transit case
• Option 5500A/LEADS: test lead set
• Option 5500A/HPROBE: humidity measurement probe
• Option FLUKE-700PCK: pressure module calibration kit
• Option FLUKE-700PD7: dual-pressure module (-15/200 psi)
• Option FLUKE-700PTP: hand pump
• 5800A/TDP: 125 ps tunnel diode pulser
• Y8021: IEEE-488 shielded interface cable

Performance Characteristics of the 5520A/6-2-USMC

Form Factor	Benchtop
Type	Multifunction
DC Volts Minimum Range	0 V
DC Volts Maximum Range	1000 V
DC Volts No. of Ranges	6 QTY
DC Volts Range Steps	1/10/100
DC Volts Minimum Resolution	0.01 uV
DC Volts Maximum Resolution	1020 uV
DC Volts Basic 1 yr accuracy	0.0018 %
AC Volts Minimum Range	1 mV
AC Volts Maximum Range	1020 V
AC Volts No. of Ranges	6 QTY
AC Volts Range Steps	1/10/100
AC Volts Minimum Frequency	10 Hz
AC Volts Maximum Frequency	500 kHz
AC Volts Minimum Resolution	1 uV
AC Volts Maximum Resolution	10 mV
AC Volts Basic 1 Year Accuracy	0.8 %
DC Current Minimum Range	0 A
DC Current Maximum Range	20.5 A
DC Current No. of Ranges	8 QTY
DC Current Range Steps	1/10/100
DC Current Minimum Resolution	1 nA
DC Current Maximum Resolution	100 uA
DC Current Basic 1 yr accuracy	0.1 %
AC Current Minimum Range	29 uA
AC Current Maximum Range	20.5 A
AC Current No. of Ranges	7 QTY
AC Current Range Steps	1/10/100
AC Current Minimum Resolution	0.1 uA
AC Current Maximum Resolution	5000 uA
Resistance Minimum Range	0 Ohm
Resistance Maximum Range	1100 MOhm
Resistance No. of Ranges	17 QTY
Resistance Range Steps	1/10/100
Resistance Minimum Resolution	0.0001 Ohm
Resistance Maximum Resolution	10000 Ohm
Resistance Basic 1 yr accuracy	1.5 %
Minimum Frequency	0.01 Hz
Maximum Frequency	600 MHz
Frequency Resolution	0.01 Hz
Frequency Accuracy	0.0025 %
Connector Type to DUT	BNC,screw-post

Programmability/Connectivity of the 5520A/6-2-USMC

User Interface	Proprietary
Ports to Peripheral Devices	IEEE-488 (GPIB), RS-232

5520A/6-2-USMC Compliance

CE Compliance	Compliant
UL Compliance	Compliant
Safety Issue	IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994;CAN/CSA-C22.2 No. 1010.1-92

5520A/6-2-USMC Power Requirements

Input Power

Universal (Auto Sense and Switch)

5520A/6-2-USMC Physical Dimensions

• Width: 17.01 in(.66 in)
• Height: 7.01 in(.27 in)
• Length: 18.62 in(.73 in)
• Weight: 48.5 lbs(106.92 lb)