Product Description:
Agilent Technologies, Inc. 11722A 100 kHz to 2.6 GHz, Sensor Module
Feature:Instrument Application: GENERAL
Measurement Parameter: RF Power
Frequency: 100kHz
HP 11722A Sensor Module
A Single RF Connection for
All Measurements
With the HP 11722A sensor module, you get all
the performance of the measuring receiver,
plus superb power measurement accuracy, at
a single connector. Now, you can characterize
a signal without switching back and forth
between the power sensor and the analyzer's
RF input.
Very Low Input SWR and
Insertion Loss
Special care is taken with each sensor module
to minimize input SWR and resulting errors. A
low-SWR attenuator isolates the power sensor
from the source under test, reducing
mismatch. Microwave hardware and a
selected RF input cable further improve SWR
and insertion loss.
Zero the Sensor with
One Keystroke
You can zero the HP 11722A's power sensor
without removing it from the source under test.
Just push the ZERO key. After eight seconds,
zeroing completes and the new zero offsets are
stored automatically.
Individually Calibrated
Each HP 11722A sensor module is individually
calibrate RSS Uncertainty: 1.2%
Max Peak Power: 100Wpk
Switch Life: 1000000 switching
Switch Isolation: 90dB
Individually Calibrated
Power Sensor Linearity: +/-2%
|
Stock photo |