Rohde & Schwarz Test/IT/Medical/Lab Equipment
Rohde & Schwarz Test/IT/Medical/Lab Equipment at TestMart are of the highest quality in test equipment industry. We strive to present
only the highest quality information in an unbiased and neutral fashion. We focus on presenting the most
current information of product pricing and availability.
|
Manufacturer |
Model |
Condition |
Description |
Specs |
Rohde & Schwarz |
1529.0016.02 |
New (GSA discount) |
Software for measurement, visualisation and analysis ofthe channel impulse response. |
1529.0016.02 |
Rohde & Schwarz |
1529.0000.02 |
New (GSA discount) |
Rohde & Schwarz Software Viewer for Measurement, visualisation and Analysis ofthe 5G channel impuls response. |
1529.0000.02 |
Rohde & Schwarz |
1528.3540.06 |
New (GSA discount) |
Semi-rigid cables used for: - interconnection between OSP B12xVL switch modules - 8 x semi-rigid cables - with 1.85mm connectors (male plug) - 48 ports, CR8 - High-speed Digital Testing solution |
1528.3540.06 |
Rohde & Schwarz |
1528.3540.02 |
New (GSA discount) |
Semi-rigid cables used for: - interconnection between OSP B12xH switch modules - 4 x semi-rigid cables - with 2.92mm connectors (male/plug) - 24 ports, CR4 - High-speed Digital Testing solution |
1528.3540.02 |
Rohde & Schwarz |
1528.3492.02 |
New (GSA discount) |
Full support of PWC200 systems: PWC200-specific functionality, PWC200 bootup procedure, forced compatibility mode in OSP, PWC200-specific SCPI commands, PWC200-specific support in GUI Requires OSP220 base unit and OSP-B200R(var04)OSP remote control... |
1528.3492.02 |
Rohde & Schwarz |
1528.3486.02 |
New (GSA discount) |
License key for hardware trigger via BNC connectors (f) on OSP front - single mode - toggle mode - sequence mode (up to 16 paths) - addressed mode (up to 16 paths) (4 bit, D-Sub connector (m) only for OSP320!) |
1528.3486.02 |
Rohde & Schwarz |
1528.1677.44 |
New (GSA discount) |
RF switch module for OSP: - 4x RF change over SSR (SPDT) 2.92x mm connectors (f), absorptive (int. 50 Ohm termination) 9 kHz to 43.5 GHZ |
1528.1677.44 |
Rohde & Schwarz |
1528.1677.42 |
New (GSA discount) |
RF switch module for OSP: - 2x RF change over SSR (SPDT) 2.92x mm connectors (f), absorptive (int. 50 Ohm termination) 9 kHz to 43.5 GHZ |
1528.1677.42 |
Rohde & Schwarz |
1528.1660.43 |
New (GSA discount) |
RF switch module for OSP: 3x Solid State Relays 1 to 4 (SP4T), 9 kHz to 43.5 GHz, c. 2.92mm (f), absorptive (int. 50 Ohm termination) |
1528.1660.43 |
Rohde & Schwarz |
1528.1660.42 |
New (GSA discount) |
RF switch module for OSP: 2x Solid State Relays 1 to 4 (SP4T), 9 kHz to 43.5 GHz, c. 2.92mm (f), absorptive (int. 50 Ohm termination) |
1528.1660.42 |
Rohde & Schwarz |
1527.8384.45 |
New (GSA discount) |
Complete RF Test Box TS712xP-AS (with antenna ring configuration x) - pneumatic open and closing mechanism (soft close) - RF absorber - shielding effectiveness > 60 dB - 12x RF feedthroughs(no termination) - antenna ring (T: injection molded) - 6 RF... |
1527.8384.45 |
Rohde & Schwarz |
1527.8349.02 |
New (GSA discount) |
ext. RS232 remote control box for TS712xP-AS, provides interface between control computer (RS-232)and 25 pin connector of TS712xP-AS (25 pin cable between control box and TS712xP-AS is included) |
1527.8349.02 |
Rohde & Schwarz |
1527.8190.02 |
New (GSA discount) |
Remote control Available interfaces: RS-232 (DB-9 female connector) and Ethernet (RJ45) |
1527.8190.02 |
Rohde & Schwarz |
1527.6181.02 |
New (GSA discount) |
Service and calibration toolkit for SSCU3 Requires vector network analyser |
1527.6181.02 |
Rohde & Schwarz |
1527.5227.02 |
New (GSA discount) |
Host for RF front-ends + in-band modules standard components not suitable for conformance testing needs B + F + S packages to run |
1527.5227.02 |
Rohde & Schwarz |
1527.5210.02 |
New (GSA discount) |
Includes in-band UL / DL boards fits to SSCU3A-1 |
1527.5210.02 |
Rohde & Schwarz |
1527.5204.02 |
New (GSA discount) |
Includes 8 main RF paths and 8 parallel testing RF paths fits to SSCU3A-1 |
1527.5204.02 |
Rohde & Schwarz |
1527.5191.02 |
New (GSA discount) |
Host for front-ends and in-band modules premium components certified for conformance needs B + F + S packages to run |
1527.5191.02 |
Rohde & Schwarz |
1527.5056.00 |
New (GSA discount) |
RF-CABLE 26,5GHZ / 2000MM |
1527.5056.00 |
Rohde & Schwarz |
1527.5004.02 |
New (GSA discount) |
SSCU base unit 1 for TS8980 includes signalling boards variant 1 |
1527.5004.02 |